Skip to main content

How to fix "This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading." message and install Mavericks or older operating system versions of OS X on VmWare Fusion application

It is very annoying to see  the message "This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading."  when you try to install old releases of Apple OS X operating systems such as Mountain Lion, Mavericks, Yosemite etc. If you are trying to install OS X Mavericks as virtual machine in VMWare fusion or in physical system, then follow below steps to successfully install the operating system.

In VMWARE Fusion.

  1. Create a OSX Mavericks VM by attaching OSX Mavericks Installer to the virtual machine.
  2. Do not Poweron the virtual machine. If powered on automatically after 1st step above then poweroff the VM.
  3. Open Virtual Machine Settings, Goto Advanced Section.
  4. Un check "Synchronize Time" setting.
  5. Start the Virtual Machine to install the OSX Mavericks.
  6. In the OSX Installer app , Launch Terminal.app.
  7. Set the system date to old date as date 102613152013 (Oct/26/2013 13:15).
  8. Quit the Terminal application.
  9. Continue with the installation.

In Physical System:

Prior starting the installation change the system date to old date as said above using terminal app launched from OS X Installer application.

Comments

  1. Use following date for :

    1. Mountain Lion : 102613152012
    2. Mavericks:102613152013
    3. Yosemite: 102613152014
    4. El Capitan: 102613152015

    ReplyDelete
  2. Why iMac Macbook production before Maverick Osx no internet recovery
    this an answer

    ReplyDelete

Post a Comment

Popular posts from this blog

How to find firmware or boot ROM version in Mac OS X

Firmware and boot ROM version of your mac can be found in two ways. Way 1 : 1. From "Apple" menu , choose "About This Mac" menu item. 2. Click " More Info " to open "System Profiler" application. 3. Under Contents -> Select Hardware Tree item. On the right side panel Under hardware overview section, we can see Boot ROM Version and SMC (Firmware) Version. Way 2 : Run the below command in terminal to get boot ROM version and SMC(firmware) version : $ system_profiler SPHardwareDataType | grep -i "Version" | awk -F ':' '{print $1 $2}'

How to extract signing certificates from macOS binary files

Code signing is a macOS security technology that you use to certify that an app was created by you. Once an app is signed, the system can detect any change to the app—whether the change is introduced accidentally or by malicious code. As Apple Developer site says ( click here for more details  on code signing) : code signing allows the operating system to: Ensure that a piece of code has not been altered since it was signed.  The system can detect even the smallest change, whether it was intentional (by a malicious attacker, for example) or accidental (as when a file gets corrupted). When a code signature is intact, the system can be sure the code is as the signer intended. Identify code as coming from a specific source (a developer or signer).  The code signature includes cryptographic information that unambiguously points to a particular author. Determine whether code is trustworthy for a specific purpose.  Among other things, a developer can use a code signature to s

What are the useful nvram settings in macOS ?

The OS X boot arguments are useful for troubleshooting problems with system startup and how the system behaves when running. sudo nvram boot-args="-v" :  This command will set the system to always boot to verbose mode, so we do not need to hold Command + V at system startup. sudo nvram boot-args="-x" :  This will set the system to always boot into Safe Mode. sudo nvram boot-args="-s" :  This command will boot the system into single user mode without needing to hold Command-S at system startup. sudo nvram boot-args="iog=0x0"  :   when you close the display but connect the system to an external monitor and keyboard the system will stay awake. After running this command, when connecting an external monitor, the internal display will be disabled, which can be beneficial in some situations such as those where you are mirroring your desktop but wish to run the external display at a higher resolution than your laptop can run. sudo nvram b